Test Possibilities and other services

´Test Facilities for the design test of Pressure Receptacles

for the endurance / temperature range tests – also according to EN 12245, EN 12257, ISO 11119-1, -2 and -3, EN ISO 11439 and ECE R110.
for the Burst test
for the drop test
for the permeation test of material samples up to a pressure of 1x 10-9 mbar 1/s.
for leakage rate determination of pressure receptacles up to a pressure of 1x 10-9 mbar 1/s.
for the aerosol cap test according to EN 962:2000
for the test of torque resistance and the stability of the neck according to EN 12245 and ISO 11119-2 und -3
for the burning test according to EN 12245, ISO 11119-2 and -3, EN ISO 11439 and ECE R110

Test Facilities for testing of valves and equipment accessories / fittings

for impermeability tests:
with hydrogen, nitrogen, and helium within a pressure range of 0-360 bar, and/or prospectively 0-1150 bar and within a temperature range of -40°C to +90°C
with compressed air in a pressure range of 0-300 bar and inside a temperature range of -20°C bis + 65°C
for stability tests:
statically with water (1200 bar) or oil (4500 bar)
cyclic endurance test using compressed air (according to EN 849:2001 and scheme EN ISO 10297:2002; EN 13152:2003 and 13153:2003)
Endurance test for large fittings >DN40
Endurance test for residual gas valves (according to scheme 15996:2002)
Endurance test for safety valves for LPG (according to EN13953:2003)
for acetylene flammable reaction tests (according to EN 849:2001 and scheme EN ISO 10297:2002
for the drop- impact test with a maximum collision energy of up to 1000 Joule (according to EN 849:2001 and scheme EN ISO 10297:2002; EN 13152:2003 and 13153:2003)
for the flow rate measurement for LPG-Valves (according to EN13953:2003)
for the functionality test of the fire extinguisher valve
for the bursting disk test according to TRG 254

Further possibilities

Ultrasonic thickness measurement
Sonic emissions analysis – also connected with Fatigue tests
Rigidity measurement
Multi-channel extension measurement
FE-Analysis

Contact

Official publications, pressure receptacles

further information