14.11.2018

PATRAM 2016

The 18th International Symposium on the Packaging and Transportation of Radioactive Materials
in September 18-23, 2016, Kobe, Japan.

Summary of all Presentations and Final Papers of the BAM Participants.


Konrad Linnemann, Viktor Ballheimer, Jens Sterthaus, Annette Rolle, Frank Wille, Ramil Nasyrow (ITU), Dimitrios Papaioannou (ITU), Efstathios Vlassopoulos (EPFL), Vincenzo Rondinella (EPFL)
Analysis of parameters affecting the bending behavior of spent fuel rods
Paper

Martin Feldkamp, Marko Nehrig, Claus Bletzer, A. Musolff, Frank Wille, Marina Erenberg
Behaviour of Wood Filled Impact Limiters during Fire Test
Paper

Ramil Nasyrow (ITU), Dimitrios Papaioannou (ITU), V.V. Rondinella (ITU), Efstathios Vlassopoulos (EPFL), Konrad Linnemann, V. Ballheimer, Jens Sterthaus, Annette Rolle, Frank Wille, S. Caruso (NAGRA)
Bending test device for mechanical integrity studies of spent nuclear fuel rods
Paper

Steffen Komann, Frank Wille, Bernahd Droste
Gap Analysis by Periodical Reviews of Transport Package Design Safety Reports of German SNF/HLW Dual Purpose Casks
Paper

André Musolff, Thomas Quercetti, Karsten Müller, Matthias Bartholmai
Impact Analysis of RAM Packages under Kinematic Aspects
Paper

Martin Neumann, Frank Wille, Bernhard Droste
Introduction of BAM safety assessment experience feedback list
Paper

Matthias Jaunich, Anja Kömmling, Kerstin von der Ehe, Holger Volzke, Dietmar Wolff
Long-term Behavior of Elastomer Seals and Polymers for Neutron Shielding
Paper

Eva-Maria Kasparek, Holger Völzke
Non-Heat Generating Legacy Waste: New Strategies for Older Vessels
Paper

Frank Wille, Thomas Quercetti, Viktor Ballheimer, Jens Sterthaus
Package Design Assessment Aspects of Gaps between Content and Lid
Paper

Karsten Müller, Alexia Favre (DAHER), Franz Hilbert (DAHER), Thomas Quercetti, Tino Neumeyer, Barbara Weingart
Prototype Testing of a Protective Structural Packaging for 30B Cylinder
Präsentation
Paper

Olaf Schilling (TÜV Rheinland), Frank Wille, Dietmar Wolff, Thilo Nitz
Quality Assurance in Fabrication and Operation of Dual Purpose Casks for Spent Nuclear Fuel in Germany
Paper

Holger Völzke, Dietmar Wolff
Spent Nuclear Fuel and HLW Storage towards Disposal - Challenges and Perspectives of an Integrated Approach
Paper

Marianne Moutarde (IRSN), Gilles Sert (IRSN), Marie-Thérèse CAILLARD-LIZOT (IRSN), Benoit ECKERT (IRSN), Frank Wille, Andreas APEL, Akiko Konnai (National Maritime Research Institute, Tokyo), David Pstrak (US Nuclear Regulatory Commission), John Harvey (Transport Container Standardisation Committee), Bruno Desnoyers (World Nuclear Transport Institute), Peter Purcell (World Nuclear Transport Institute), Vincent FIACCABRINO (ASN)
Stowage during Transport: A Proposal for Harmonization
Paper

PATRAM 2013

The 17th International Symposium on the Packaging and Transportation of Radioactive Materials
in August 18-23, 2013, San Francisco, California, hosted by the Institute of Nuclear Materials Management, USA.
www.patram.org

Summary of all Presentations and Final Papers of the BAM Participants.

Technical Keynote

Session 152
Bernhard Droste
A Survey On 35 Years Of Packaging, Transport And Storage Of Radioactive Materials
Presentation | Paper

Session A

Package Analysis: Structural Analysis – Modeling, Session 280
Uwe Zencker, Günter Wieser, Linan Qiao, Christian Protz
Modeling Strategies for Dynamic Finite Element Cask Analyses
Presentation | Paper

Package Analysis: Structural Analysis – Modeling, Session 217
Olaf Schilling (TÜV Rheinland), Lars Müller, Frank Wille, Viktor Ballheimer, Steffen Komann
Analytical Approaches within the Assessment Strategy of Numerical Analyses of components of RAM Packages
Presentation | Paper

Package Analysis: Structural Analysis Special Topics, Session 140
Thomas Quercetti, Viktor Ballheimer, Bernhard Droste, Karsten Müller
Internal Cask-Content-Collisions During Drop Test of Transport Casks for Radioactive Materials
Presentation | Paper

Package Analysis: Structural Analysis Special Topics, Session 157
Konrad Linnemann, Viktor Ballheimer, Jens Sterthaus, Frank Wille
Methodological Aspects for Numerical Analysis of Lid Systems for SNF and HLW Transport Packages
Presentation | Paper

Session B

Package Analysis: Thermal Analysis, Session 160
Jens Sterthaus, Viktor Ballheimer, Claus Bletzer, Konrad Linnemann, Marko Nehrig, Frank Wille
Numerical Approach for Containment Assessment of Transport Packages Under Regulatory Thermal Test Conditions
Presentation
Paper

Package Design: Aging Management - Long-term Storage and Containment, Session 104
Holger Völzke, Dietmar Wolff, Ulrich Probst, Sven Nagelschmidt, Sebastian Schulz
Long-term Performance of Metal Seals for Transport and Storage Casks
Presentation
Paper

Package Design: Aging Management - Long-term Storage and Containment, Session 184
Dietmar Wolff, Holger Völzke, Frank Wille, Bernhard Droste
Extended Storage after Long-Term Storage
Presentation
Paper

Package Design: Aging Management - Long-term Storage and Containment, Session 125
Annette Rolle, Ulrich Probst, Viktor Ballheimer, Tino Neumeyer, Hans-Peter Winkler (GNS)
Verification of Design Leakage Rates for Activity Release Calculation
Presentation
Paper

Package Design: Design Testing and Analysis I, Session 257
Martin Neumann, Frank Wille, Konrad Linnemann, Sven Schubert, Viktor Ballheimer, Jens Sterthaus, Bernhard Droste
Reflection on BAM Design Assessment of TN®24E Transport Package
Presentation | Paper

Package Design: Design Testing and Analysis I, Session 181
Karsten Müller, Thomas Quercetti, André Musolff, Bernhard Droste
Quality Assurance Requirements for Mechanical Test Campaigns of Packagings
Presentation | Paper

Package Design: Aging Management - Long-term Storage and Containment, Session 227
Matthias Jaunich, Wolfgang Stark, Dietmar Wolff, Holger Völzke
Investigation of Elastomer Seal Behavior for Transport and Storage Packages
Presentation | Paper

Package Design: Aging Management - Long-term Storage and Containment, Session 154
Sven Schubert, Frank Wille, Viktor Ballheimer, Bernhard Droste
Assessment Feedback on Material Compatibility and Determination of Material Parameteres for Transport Packages Used as Dual Purpose SNF and HLW Casks
Presentation | Paper

Package Design: Aging Management - Long-term Storage and Containment, Session 355
Koji Shirai (CRIEPI), Kosuke Namba (CRIEPI), Masumi Wataru (CRIEPI), Holger Völzke, Dietmar Wolff, Ulrich Probst
Numerical Evaluation of the Long-term Sealing Performance of the Silver Gasket for Dual Purpose Metal Cask under High Temperature
Paper

Session D

Package Design: Design-Material Applications, Session 127
Linan Qiao, Uwe Zencker, Eva-Maria Kasparek, Holger Völzke, Robert Scheidemann
Development of a Finite Element Model for Damping Concrete under Severe Impact Loads
Presentation | Paper

Package Design: Design-Material Applications, Session 173
Germar Eisenacher, Robert Scheidemann, Martin Neumann, Frank Wille, Bernhard Droste
Crushing Characteristics of Spruce Wood Used in Impact Limiters of Type B Packages
Presentation | Paper

Package Design: Design-Material Applications, Session 169
Robert Scheidemann, Eva-Maria Kasparek, Karsten Müller, Bernhard Droste, Holger Völzke
Model-sized and Full-scale Dynamic Penetration Tests on Damping Concrete
Presentation | Paper

Regulatory and Institutional Issues: Dual Purpose Casks, Session 153
Bernhard Droste, Frank Wille
Maintenance of Package Design Safety Report Effectiveness of SNF/HLW Dual Purpose Casks
Presentation
Paper

Regulatory and Institutional Issues: Dual Purpose Casks, Session 238
Yumiko Kumano (IAEA), Bernhard Droste, Makoto Hirose, John Harvey, Ingo Reiche, Dietmar Wolff, Paul McConnell, Kasturi Varley
Overview Of The Iaea's Joint Working Group On Integrated Safety Case For Dual Purpose Casks
Presentation
Paper

Session F

Package Analysis: Retention System and Package Analysis Guidance, Session 141
Andreas Apel, Viktor Ballheimer, Christian Kuschke, Sven Schubert, Frank Wille
Proposal for Regulatory Improvement on Load Assumptions for Routine Conditions of Transport
Presentation

Transport Operations: Spent Fuel and Waste Management, Session 122
Frank Wille, Dietmar Wolff, Bernhard Droste, Holger Völzke
German Approach and Experience Feedback of Transport Ability of SNF Packages after Interim Storage
Presentation | Paper

Transport Operations: Spent Fuel and Waste Management, Session 174
Anton Erhard, Holger Völzke, Bernhard Droste, Dietmar Wolff, Frank Wille
Nuclear Power Plant Waste Management Strategy in Germany
Presentation | Paper

Session G

Package Design: Design - Testing and Analysis II, Session 108
Marko Nehrig, Claus Bletzer, Martin Feldkamp, Frank Wille
Thermal Test Driven Pressure Build-up Inside Type-B Packages Containing Wet Radioactive Waste
Presentation | Paper

Session H

Package Challenges: Large Components and Long-term Aging and Storage, Session 166
Steffen Komann, Yusuf Kiyak, Frank Wille, Uwe Zerbst, Mike Weber, Dietmar Klingbeil
Assessment of Ductile Cast Iron Fracture Mechanics Analysis within Licensing of German Transport Packages
Presentation | Paper

Package Analysis: Structural Analysis and Verification, Session 202
Mike Weber, Uwe Zencker, Dietmar Wolff, Holger Völzke, Uwe Herbrich, Sven Nagelschmidt
Numerical Analysis of Cask Accident Scenarios in Storage Facilities
Presentation | Paper

Poster Session

Session A, Session 159
André Musolff, Thomas Quercetti, Karsten Müller, Klaus-Peter Gründer, Bernhard Droste
Experimental Testing of Impact Limiters for RAM packages Under Drop Test Conditions
Poster
Paper

Session A, Session 168
Jürgen Auster, Tino Neumeyer, Karsten Müller, Bernhard Droste
Leakage Testing during Lateral Displacement of Metallic Seals under Mechanical Accident Impact
Poster
Paper

Session A, Session 167
Steffen Komann, Carsten Gröke, Bernhard Droste
Assessment of Quality Assurance Measures for Radioactive Material Transport Packages not requiring Competent Authority Design Approval
Poster
Paper

Session A, Session 180
Wolfgang Botsch, Peter Hinterding, Silva Smalian, Eva-Maria Kasparek, Holger Völzke, Dietmar Wolff
Dual Purpose Cask Safety Evaluation
Poster
Paper

PATRAM 2010

The 16th International Symposium on the Packaging and Transportation of Radioactive Materials
hosted by the Department for Transport of the United Kingdom, in cooperation with the International Atomic Energy Agency, the International Maritime Organization and the World Nuclear Transport Institute.

Summary of all Presentations and Final Papers of the BAM Participants.

Final Program

Plenary Presentation
Bernhard Droste
Interaction Of Package Design Development And Package Design Safety Assessment

Panel 7
Holger Völzke, Dietmar Wolff
Aspects on Long Term Storage of Used Nuclear Fuel and High Active Waste in Germany

Paper 017
Annette Rolle, Bernhard Droste, Sven Schubert, Ulrich Probst, Frank Wille
Verification Of Activity Release Compliance With Regulatory Limits Within Spent Fuel Transport Casks

Paper 026
Mike Weber, Frank Wille, Viktor Ballheimer, Andre Musolff
From Experiment To An Appropriate Finite Element Model - Safety Assessment For Ductile Cast Iron Casks Demonstrated By Means Of IAEA Puncture Drop Test

Paper 041
Frank Koch, Jens Sterthaus, Claus Bletzer
The Influence Of Thermal Expansion On Package Tightness During Fire

Paper 042
Steffen Komann, Martin Neumann, Viktor Ballheimer, Frank Wille, Mike Weber, Linan Qiao, Bernhard Droste
Mechanical Assessment Within Type B Packages Approval - The Application Of Static And Dynamic Calculation Approaches
Paper | Poster

Paper 043
Steffen Komann, Bernhard Droste, Frank Wille
Transport Of Large Nuclear Power Plant Components - Experiences In Mechanical Design Assessment

Paper 046
Ronald B. Pope, Frank Wille
Historical Background – Early Deliberations on and Assessments of the Need for a Dynamic Crush Test

Paper 061
Anton Erhard, Holger Völzke, Ulrich Probst, Dietmar Wolff
Ageing Management for Long Term Interim Storage Casks

Paper 092
Christian Kuschke, Viktor Ballheimer, Frank Wille, Steffen Komann
Mechanical Assessment Criteria Of Spent Fuel Assemblies Basket Design

Paper 100
Viktor Ballheimer, Frank Wille, Bernhard Droste
Mechanical Safety Analysis For High Burn-up Spent Fuel Assemblies Under Accident Transport Conditions

Paper 114
E. Kasparek, R. Scheidemann, U. Zencker, D. Wolff, H. Völzke
Effect Of Dynamic Loading On Compressional Behavior Of Damping Convrete

Paper 117
Linan Qiao, Uwe Zencker, Frank Wille, Andre Musolff
Numerical Simulation Of 9 Meter Drop Of A Transport And Storage

Paper 123
A. Neser, D. Schreiber, J. Magallanes, R. Martinez, U. Zencker, M. Weber
A Material Testing Program To Characterize The Concrete Behavior Under Static And Dynamic Loads

Paper 124
Frank Wille, Bernhard Droste, Karsten Müller, Uwe Zencker
Mechanical Design Assessment Approaches Of Actual Spent Fuel And HLW Transport Package Designs

Paper 169
Matthias Jaunich, Kerstin von der Ehe, Dietmar Wolff, Holger Völzke, Wolfgang Stark
Understanding The Low Temperature Properties Of Rubber Seals

Paper 172
Andre Musolff, Thomas Quercetti, Karsten Müller, Bernhard Droste, Steffen Komann
Drop Test Program With The Half-Scale Model Castor HAW/TB2

Paper 173
Kerstin von der Ehe, Matthias Jaunich, Dietmar Wolff, Martin Böhning, Harald Goering
Radiation Induced Structural Changes Of (U)HMW Polyethylene With Regard To Its Application For Radiation Shielding

Paper 205
Jens Sterthaus, Viktor Ballheimer, Frank Wille
Analysis Methodology And Assessment Criteria For Bolted Trunnion Systems Of Type B Packages For Radioactive Materials

Paper 218
Bernhard Droste, Armin Ulrich, Joerg Borch
Brandnew Fire Test Facilities At "BAM Test Site Technical Safety"
Poster

Paper 219
Uwe Zencker, Mike Weber, Frank Wille
Finite Element Mesh Design Of A Cylindrical Cask Under Puncture Drop Test Conditions

Paper 220
Uwe Zencker, Mike Weber, Linan Qiao, Bernhard Droste, Holger Völzke
Mechanical Safety Analyses Of Cast Iron Containers For The Konrad Repository

Paper 268
Uve Günther, Manfred Baden, Steffen Komann, Thilo Nitz
Performance And Restrictions Of Non-Destructive Testing (NDT) Within The Quality Surveillance During Manufacturing Of Type B-Packages

Paper 363
Marko Nehrig, Frank Wille, Thomas Quercetti, Jörg-Peter Masslowski, Bernhard Droste, Ronald Pope
Historical View And Experiences With The Crush Test For Light Weight Packages

Paper 367
Motonori Nakagami, Thomas Quercetti, Seiji Komatsuki, Kyosuke Fujisawa, Takashi Nishio, Andre Musolff, Karsten Müller, Bernhard Droste
Waste Container Drop Tests Onto A Concrete Target

PATRAM 2007

The 15th International Symposium on the Packaging and Transportation of Radioactive Materials
hosted by U.S. DOE, NRC, and DOT in cooperation with the IAEA and INMM.

In the following you find the summary of all presentations and final papers of the BAM participants:

Opening Technical Plenary

Bernhard Droste
Experiences and Perspectives of Package Testing under hypothetical Accident Conditions
Presentation
Final Paper

Analysis of various Impact Events

H. Völzke, L. Qiao, U. Zencker, D. Wolf, K. Feutlinske, A. Musolf
Topical BAM Cask Design Evaluation using Drop Tests and numerical Calculations: Accidental Cask Drop without Impact Limiters onto a Storage Building Foundation
Presentation | Final Paper

Drop Testing - I

T. Quercetti, K. Mueller, S. Schubert
Comparison of Experimental Results from Drop Testing of a Spent Fuel Package Design using a full-scale Prototype Model and a reduced-scale Model
Presentation | Final Paper

F. Wille, V. Ballheimer, B. Droste
Suggestions for the correct Performance of IAEA 1m Puncture Bar Drop Test with reduced scale Packages considering Similarity Theory Aspects
Presentation | Final Paper

A. Musolff, K. Müller, M. Neumann, A. Kadji, B. Droste
Drop Test Results of the full-scale CONSTOR V/TC Prototype
Presentation
Final Paper

M. Neumann, F. Wille, B. Droste
Using scale Model Impact Limiter in the Design Safety Assessment of Transport Casks for radioactive Material
Presentation
Final Paper

F. Hilbert (NCS), C. Kuschke, T. Goedecke, T. Neumeyer
Drop Testing of the NCS 45
Presentation
Final Paper

Structural Materials/ Cladding/ Packaging

U. Zencker, L. Qiao, M. Weber, O. Kovacs, B. Droste
Application Limits of Low-Ductile Cast Iron for radioactive Waste Containers
Presentation
Final Paper

Poster

Wolfram Baer
Statistical Analysis of dynamic Fracture Toughness Data of two DCI large scale Specimen Test Series
Presentation | Final Paper

U. Probst, P. Hagenow, H. Völzke
Investigation of Seal Effects according to axial Compression Variation of Metal Seals for Transport and Storage Casks
Presentation | Final Paper

K. Gruender, D. Kadoke, K. Mueller, A. Musolff
Characterization of Shock Absorber Deformation by optical Surface Digitization
Presentation | Final Paper

Impact Analysis

L. Qiao, G. Wieser, U. Zencker, B. Droste
Dynamic Finite Element Analysis of a HLW Transport Cask with Polyurethane Impact Limiters in 9m Drop Tests
Presentation
Final Paper

Transportation of Large Objects/ General Interest

F. Koch, B. Droste, T. Krietsch
Consequences of the Drop Test Parameter Limitations for subsequent Package Design Safety Analysis
Presentation | Final Paper

Design Methodologies

F. Wille, B. Droste, F. Koch, S. Schubert, S. Komann
State-of-the-Art Assessment of Package Design Safety Analysis
Presentation | Final Paper

V. Ballheimer, F. Koch, C. Kuschke, B. Droste
Similarity Aspects for Closure Systems in small scale Package Drop Testing
Presentation | Final Paper

Materials Interactions Containment/Seals

S. Schubert, F. Koch, U. Probst, H. Winkler (GNS)
Behavior of Metallic Seals in CASTOR-Casks under Normal and Accident Conditions of Transport Qualification
Presentation | Final Paper

Managing Safe Transport

A. Rolle, B. Droste

Safety during whole Life Time - An important Aspect in Safety Assessment of sealed radioactive Sources

Presentation | Final Paper

Thermal Testing and Analysis - II/ Drop Testing - II

F. Koch, C. Bletzer, G. Wieser
Consideration of asymmetrical Heat Transmission and Distribution using numerical Methods
Presentation | Final Paper

K. Müller, N. Melnik, T. Quercetti, N. Schneider, B. Droste
Impact Target Characterization of the BAM Drop Test Facility
Presentation | Final Paper

M. Neumann, F. Wille, V. Ballheimer
Estimation of Cask Deceleration and Impact Limiter Deformation using the Calculation Tool „Impactcalc“
Presentation | Final Paper

Design and Materials Impact Limiters, Quality Assurance

U. Günther*, M. Baden*, T. Nitz (* = TÜV Rheinland)
Official Monitoring of the quality Assurance in the Manufacture of Spent Fuel and High-Level Waste Transport and Storage Casks
Presentation | Final Paper

Transport and Storage of Spent Fuel and High Level Waste

A. Erhard, H. Völzke, V. Noak, W. Weber, D. Wolf, D. Rittscher*, H. Schmitt*, (* = EWN)
Long Term interim Storage Facility for nuclear Reactor Compartments of Submarines - German Support for Utilization of nuclear Submarines in Russia
Presentation
Final Paper

Veröffentlichungen

An dieser Stelle finden Sie eine Auswahl an Veröffentlichungen, die wir zum Download bereit stellen können.
Weitere Veröffentlichungen aus den Fachgruppen 3.3 und 3.4 finden Sie in der BAM-Datenbank PUBLICA.

2009

Dipl. Ing. Martin Neumann
Investigation of the Behavior of Shock-Absorbing Structural Parts of Transport Casks Holding Radioactive Substances in Terms of Design Testing and Risk Analysis
(BAM-Dissertation Series, Volume 45)

B. Droste, K. Müller, A. Musolff, M. Neumann, T. Quercetti
Fallversuche mit Brennelement /HAW-Transport- und Lagerbehältern in Originalgröße
Abschlussbericht zum Forschungsvorhaben mit dem BMBF-Förgerkennzeichen 02S8274
(BAM-Vorhaben Nr. 3311)

2007

B. Droste
Testing of type B packages in Germany to environments beyond regulatory test standards
in "Packaging, Transport, Storage & Security of Radioactive Material" Vol. 18 No. 2, pp 73-85

F. Wille, V. Ballheimer, B. Droste
Suggestions for correct performance of IAEA 1 m puncture bar drop test with reduced scale packages considering similarity theory aspects
in "Packaging, Transport, Storage & Security of Radioactive Material" Vol. 18 No. 2, pp 111-116

2004

Karsten Müller, Mathias Minack, Bernhard Droste
The New BAM Drop Test Facility for Big Full-Scale Casks
Poster auf der PATRAM 2004

Thomas Quercetti, Karsten Müller
Importance Of Strain And Acceleration Measurements During Drop Tests For Safety Analysis And Package Design Optimization
Vortrag auf der PATRAM 2004

H. Völzke, G. Wieser, U. Zencker, L. Qiao, V. Ballheimer
German Competent Authority Guidance in FE Methods Applications for Package Design Assessment
Vortrag auf der PATRAM 2004, veröffentlicht in RAMTRANS Vol. 15 No. 3-4, pp 173-180

D. Wolff, U. Probst, H. Völzke, B. Droste, R. Rödel
Safety Aspects of Long-term Dry Interim Storage of Type-B Spent Fuel and HLW Transport Casks
Vortrag auf der PATRAM 2004, veröffentlicht in RAMTRANS Vol. 15 No. 3-4, pp 207-214

U. Zencker, L. Qiao, B. Droste
Development of Assessment Methods for Transport and Storage Containers with Higher Content of Metallic Recycling Material
Vortrag auf der PATRAM 2004

U. Zencker, K. Müller, B. Droste, R. Rödel, H. Völzke
The Application of Fracture Mechanics to the Safety Assessment of Transport Casks for Radioactive Materials
Vortrag auf der PATRAM 2004, veröffentlicht in RAMTRANS Vol. 15 No. 3-4, pp 191-198

2003

B. Droste, G. Wieser, T. Krietsch, Th. Quercetti, H. Völzke, P. Zeisler, U. Zencker
Richtlinie für numerisch geführte Sicherheitsnachweise im Rahmen der Bauartprüfung von Transport- und Lagerbehältern für radioaktive Stoffe
BAM-GGR 008, Rev. 0, BAM, Berlin, Februar 2003

2002

V. Ballheimer, T. Quercetti, P. Zeisler
Effects and Consequences of Interactions Between Containment Components and Content of Type B Packages During 9m. Drop Test
in RAMTRANS, Volume 13, Nos. 3-4 2002, pp 305-312

B. Droste, H. Völzke, G. Wieser, L. Qiao
Safety Margins of Spent Fuel Transport and Storage Casks Considering Aircraft Crash Impacts
in RAMTRANS, Volume 13, Nos. 3-4 2002, pp 313-316

U. Zenker, L. Qiao, B. Droste
Dynamic Fracture Mechanics Safety Assessment of Cask Designs
in RAMTRANS, Volume 13, Nos. 3-4 2002, pp 291-296

2001

B. Droste
Bauartprüfung, Qualitätssicherung und Sonderversuche mit CASTOR-Behältern
in Tagungsband "Fachtagung Standortnahe Zwischenlager", Bonn, März 2001, Seite 141-194

B. Droste, T. Quercetti, B. Gogolin
Test Facilities for Radioactive Materials Transport Packages
in International Journal of Radioactive Material Transport, Directory of Test Facilities For Radioactive Materials Transport Packages, RAMTRANS, Special Issue; Vol. 12 (2001) 2-3, pp 105-113

B. Droste, B. Schulz-Forberg
Investigation of a Spent Fuel Cask Beside an Exploding Propane Tank
PATRAM 2001

B. Gogolin, B. Droste, P.Perez Millan (ENUSA Industrias Avanzadas S.A., Spain)
Drop Tests with the “RA-3D” Shipping Container for the Transport of Fresh BWR-Fuel Assemblies
PATRAM 2001

W. Jahreiß (Framatome ANP Gmbh), U. Philippczyk, W. Paulinyi (Advanced Nuclear Fuels GmbH), J.-P. Masslowski (BAM)
ANF-10: A New Transport Container for Fresh BWR Fuel Assemblies According to IAEA Requirements
PATRAM 2001
The shipment of non-irradiated BWR uranium fuel assemblies (including enriched reprocessed uranium or ERU) as well as BWR and PWR fuel rods from the fabrication facility to power plants is performed using the new ANF-10 transport container. The ANF-10 container design fully meets the requirements of IARA Safety Standards Series, No. TS-R-1 (ST-1, Revised) for transportation by road, rail and sea. (…) All drop and fire tests for the ANF-10 container were performed at the Federal Institute for Materials Research and Testing (BAM) in Berlin, Germany and its test site in Lehre, Germany.

W. Jahreiß (Framatome ANP Gmbh), U. Philippczyk, W. Paulinyi (Advanced Nuclear Fuels GmbH), T. Quercetti (BAM)
ANF-18: A New Transport Container for Fresh PWR Fuel Assemblies According to IAEA Requirements
PATRAM 2001

P.P. Millan (ENUSA Industrias Avanzadas S.A.), C. Vaughan (Global Nuclear Fuel GNF), B. Gogolin (BAM)
Drop Test for the Licensing of the RA-3D Package in the Transport of BWR Fresh Fuel Assemblies
PATRAM 2001

K. Müller, W. Baer, P. Wossidlo
Investigations on the Dynamic Fracture Toughness of Heavy-Section Ductile Cast Iron for Transport and Storage Casks
PATRAM 2001

T.Quercetti, V. Ballheimer, G. Wieser
Analytical, Numerical and Experimental Investigations on the Impact Behaviour of Packagings for the Transport of Radioactive Material under Slap Down Conditions
PATRAM 2001

R.Rödel, T. Krietsch, P.Zeisler
Current Type B-Package Approval Procedures in Germany: Selected Topics From Safety Assessment
PATRAM 2001

P.Zeisler, B. Gogolin, V. Ballheimer, u.a.
Strain of Lid Bolts of Type B Packages During 9 M Drop Tests – Results of real Tests and Problems of Analytical Prediction
PATRAM 2001

U. Zencker, L. Qiao, B. Droste
Assessment of Dynamically Loaded Surface Cracks in Cubic Containers
PATRAM 2001

2000

V. Ballheimer, A. Probst, B. Droste
Numerical Assessment of Spent Fuel Casks Impacting on Real Targets
in RAMTRANS, Volume 11, Nos. 1-2 2000, pp 45-51

H. Völzke, B. Droste, R. Rödel
Experiences and Status in Safety Assessment Methods within the Scope of Licensing Procedures for Multi-Purpose Flasks in Germany
in RAMTRANS, Volume 11, Nos. 1-2 2000, pp 39-43

U. Zencker, P. Zeisler, B. Droste
Dynamic Fracture Mechanics Assessments for Cubic Ductile Cast Iron Containers
in RAMTRANS, Volume 11, Nos. 1-2 2000, pp 113-118

1999

B. Droste, U. Probst, W. Heller
Impact of an Exploding LPG Rail Tank Car onto a CASTOR Spent Fuel Cask
International Journal of Radioactive Materials Transport (RAMTRANS), Volume 10, No. 4 1999, pp 231-240

1997

H. Völzke, G. Wieser, U. Zencker, B. Droste
Mechanical and Thermal Safety Analyses and Demonstrations for Cubic DCI Multipurpose Containers
International Journal of Radioactive Materials Transport (RAMTRANS), 8 (1997) 3-4, S. 247-252

1995

B. Droste, B. Gogolin, H. Völzke, T. Querceti, B. Günther
Extended Drop Tests of DCI Casks with Artificial Flaws Demonstrating the Existing Safety Margins.
International Journal of Radioactive Materials Transport (RAMTRANS) Vol. 6 1995 Nos. 2/3, pp 177-182